Vix's Scrap Tag Tutorials: Tag Tutorial - Bite Me!

Monday 18 October 2010

Tag Tutorial - Bite Me! - PTU

Supplies Needed

Tube and Close Up Image of Choice - I'm using a fave from Ismael Rac
I got mine at AMI but you can now get this (I believe?!) from Rac's
Store HERE

Scrapkit - "Pinked" by me, ~~you can get it from Clarey's store HERE~~
is now a FTU kit which you now get from HERE

Mask - by me, It's the first of the set HERE

Xero Graphics Greyscaler and Porcelain - fab freeware filters!

Font of Choice

_______________________

The Usual - 700 pixels by 600 pixels

Add New Layer

Floodfill White

Open the Pinked Frame - CircleGlitter

C&P

Move over to the right of the tag canvas

Duplicate

Image

Mirror

Open Pinked Paper13 or another from the kit

Resize 86% SS

C&P

Move over to the left of the tag canvas and

place below the frame on the left

Do a Selection Delete with an expand of 6

and hit Delete on the paper layer

then

Duplicate the paper part

Image

Mirror

Position as needed so both paper parts are

directly below their respective frames

Paste your large tube as a new layer

below the frame and position within the left one*

Duplicate

Image

Mirror

You may need to paste your main tube and position centrally so you

get a good idea where to place your image tubes

OK

Now repeat the Selection Delete for the tube layers

Now

on the left tube

Duplicate

and on the top copy - Adjust, Blur, Gaussian Blur 3.00

and change the Blend Mode to Overlay

and on the bottom tube layer

Apply Xero Greyscaler on the default settings

Repeat this for the right tube

Once you done this for the two big tubes - you

might want to do a canvas crop to

get rid of excess blurred tube that was hanging outside

of the tag canvas - so just crop the canvas then

Image

Canvas Size

and put it back to 700 x 600

And floodfill the White Background again :D

OK

Copy and Paste your main tube (if you haven't already done so)

and place centrally to the two frames (see my tag for ref)

Duplicate

and on the top tube - Adjust, Blur, Gaussian, 3.00 and set the blend mode to Overlay

then

On the bottom tube - Xero Porcelain on the default settings

Open PinkedPaper17

C&P

Move down the tag canvas so it's just above the White Back

Crop to canvas size 700 x 600

then

Apply my mask - Layers, Merge Group

Open the BradCluster (yeah, I know I used it in my last scrap tut - but me likes lol!)

C&P

Place under all the layer except the mask layer

and position as mine on the right

Image

Duplicate

Image

Mirror

Open the Circle of Pearls

70% SS

C&P

Place just below the main tubes layers in the LP

and on the left of the circle frames

Duplicate

DON'T mirror

Just move across to fit the right frame

Open the PinkedFrame-CircleBeads

Resize 70% SS

C&P

Place this just below the Brad Clusters in the LP

Move over and place to the top left (see my tag for ref)

Im, Dup, Im, Mirror

Open the Dotty Doodle

C&P

Place under all the circle frames in the LP

and position as mine on the top right

Right click the layer in the LP and choose Duplicate

then, Image Mirror

Open the Pussycat png

Resize 70%

C&P

Place to the left of the tag

Im, Dup, Im, Mirr

Open the paper flower

50%

C&P

Place as mine on the left

Im, Dup, Im, Mirr

I also flipped these but that's optional :)

Open the Scatter-GlitterSparkles

C&P

Place just above the BradCluster layer

and position as mine

Open the PinkedTagBackStudStrips

Cut out the bottom or top strip (doesn't matter which, they're the same lol!)

C&P

And place as mine, front and bottom centre of the tag canvas

Excellent for covering tube edges

Now, crop the canvas taking care not to edge off any mask or

glitter or any of the layers

I only cropped to 693 x 587 - big tag!

Now add some shadows of choice to the elements you'd

like to shadow

I'd suggest cats, flowers, bradclusters, frames, NOT the pearls (already shadowed)

and of course, the main tube bottom copy

I also added the White Sparkles but this is optional

then Add your name as liked

Add your artist info

Delete white Background

and

Ta-daaaaaaaaaaaaaaaaaa!! All done :) xx

I hope you enjoyed this simple tut, and if you purchase my
kit in order to make it the same as mine - then huge hugs and many thanks xx
You have no idea how much I appreciate it ((hugs))

This tutorial was written 16th October 2010

About this Blog...

Hiya blogettes,
I love scrapkits, and I love to make tags
using scrapkits too.
Personally, I enjoy opening a new kit and seeing
what goodies lay inside and what happens when
I go nutz in PSP lol!
But, I know there are lots of people who do enjoy a scrapkit tag tutorial - so here's this blog, especially for them!

Here you'll find a few scrapkit tag tutorials for you to enjoy.
Some are Pay to Use scrapkits and some are Free to
Use scrapkits.

Some will be from taggers sized kits
and some will be from full sized digiscrap kits.
Note: If a kit I've linked to is no longer available - just use another kit and see what happens...

I hope these tuts inspire you to go nutz in PSP yourselves and that you have fun with your creations and expressing yourself through gorgeous tags.

Thanks for dropping by,

hugs
Vix xx

Important Information

These tutorials are written by me (Vix) The date of creation is usually the date they are posted on the blog, sometimes earlier. They are based on tags of my own design created by me and any potential similarities to other tag tutorials that may be available is wholly unintended and completely coincidental. Please do not use my tutorials as the basis for ideas when creating your own tutorials. Be original! Any items supplied to use to create your own tag with these tutorials are supplied in good faith - if I have used something not intended for usage in this way, please contact me via email. Any items specifically created by me for the purposes of these tutorials MAY NOT be used in any other tag tutorials UNLESS I mention that they may be. Links to tube/scrap blogs or sites are added either through necessity or creator courtesy, and it is entirely up to the individual (ie. You!) if you choose to visit these sites and/or download/purchase from them. Scraps used in my tutorials that I've obtained from PTU purchased scrap kits are NOT supplied in my tutorials supplies. This website is intended for educational/entertainment purposes only NO linking to my tut examples, screen shots, files or graphics permitted. PSP groups and forums are welcome to text link to the tutorials. All of my tutorials are registered with TWI

Glossary of Terms

C&P - Copy and Paste

The Usual - New Image in PSP, 600 x 600 Pixels
Add a New Layer and Floodfill White
(I tend to make tags in 700 x 600 but my older tutorials are the first dimensions)

LP - Layer Palette

(the bit on the right in PSP which shows all the layers)

MP - Materials Palette

(also known as the Colour boxes - found at the top right of PSP)

Selection Delete - Magic Wand Tool on 0 Tolerance and
0 Feather, click inside the mentioned item (frame etc)
then Selections, Modify, Expand (or Contract) by a
certain number of Pixels which will be stated.
Then Selection Invert and either eraser delete (if asked)
or hit the Delete button to get rid of excess tube
or paper, for instance.

Magic Wand Settings - just so you know...
Mode: Add
Match Mode: RGB Value
Tolerance: 0 (unless otherwise stated)
Feather: 0 (unless otherwise stated)

Eraser Settings -
For hard removal - ie. getting rid of excess tube etc
Size: 102
Hardness: 100
Step: 5
Density: 100
Thickness: 100
Rotation: 0
Opacity: 100

Resize and 00% - if I show a number percent, like 80% etc
It means Resize that particular element
paper, tube etc by the amount stated then C&P

Double Layer Tube Emerge -

Once placed as you'd like it on your tag

Duplicate the tube layer

Move one just above the frame layer (or whatever you're wanting the tube to "emerge" from)

and one just under this layer

Hide the top tube layer

Using Magic Wand Selection - select your frame inner

and then Modify, Expand as needed

then

Selections, Invert

And take your Eraser tool on a hard strong setting (see my settings above) and erase any parts of the tube which stick out below the area you want them to be

Once deleted, Selections None

Now unhide your Top tube layer

Activate in the LP and then

and repeat the erase as needed

You should - all being well - have your tube emerging from a frame in selected parts

And that is the double layer tube emerge. Used in many of my tuts

Top Tips

1. Use a different tube/image. Nothing makes a tag from a tutorial more your own than NOT using the same tube etc.

2. Colourize your chosen kit to suit your mood or your tube = but, only if the scrap designer allows...and most do :)

3. Give a little credit if poss. Many designers do want credit for their scraps, so where able, slip a little "scraps by..." or "scrapkit by..." in your tag credits when using scrap designers that ask for credit when used online. Most of the full sized scrap designers do ask for this.

But of course, if the designer doesn't ask for credit, then that's fab too and saves on tag credit space :)

Pages

Monday 18 October 2010

Tag Tutorial - Bite Me! - PTU